TissueAid™ High Viscosity Tissue Adhesive

/TissueAid™ High Viscosity Tissue Adhesive
TissueAid™ High Viscosity Tissue Adhesive 2017-10-03T17:52:44+00:00

TissueAid™ High Viscosity Tissue Adhesive

  • Sutureless, less pain
  • Less operation time
  • Waterproof for shower, ideal wound care
  • Antibacteria, reduce infection risk
  • Better cosmetic outcome

What is TissueAid™ Tissue Adhesive for?

TissueAid™ tissue adhesive is intended for topical application to close wounds from surgical incisions and trauma-induced lacerations. TissueAid™ may be used in conjunction with deep dermal sutures.

Once applied, it protects the wound by providing a flexible barrier to prevent microbial penetration as long as the adhesive film remains intact.

TissueAid™ Features

  • Synthesized high purity 2-Octyl Cyanoacrylate with D&C Violet #2 dye

  • High viscosity formulation increases safety, enhances efficiency, and has high flexibility on the skin

  • High strength, sterile, topical skin adhesive made with patented formulation

  • Patented soft dispenser makes it easy and safe to use


TissueAid™ is provided in a sealed 0.8 gram aluminium tube with two single-use soft dispensers, and all are packaged in a Tyvex™ sterile pouch.

Benefits of TissueAid™ Tissue Adhesive

  • Patented New 2-Octyl Formulation
    High flexibility and strength

  • High Viscosity Formulation
    Increase safety, efficiency
  • Waterproof
    Patients can shower after the procedure
  • Multiple Soft Applicators
    Can treat multiple wounds
    Gentle on the wound without causing irritation

  • Microbial Barrier
    Protect the wound from bacteria
    Reduce infection risk
  • Excellent Bonding with Skin
    Close wound with comparable strength as suture
  • Less Scar than Suture
    Excellent cosmetic result
  • Painless Application
    No anaesthesia is needed
  • Secure the wound and slough off as the wound heals in 5-10 days

  • Do not require return visit for removal

  • Biodegradable, biocompatible

TissueAid™ Applications

Chest Surgery


Orthopedic Surgery

Breast Surgery


TissueAid™ Clinical Study

In studies, TissueAid™ caused less scars than suture (data on file).

Comparison of Wound Closure Devices


  • Most widely used
  • Low cost
  • Longer procedure time
  • Infection risk
  • Anesthesia (ER)
  • Pain
  • Scar

Skin Staple

  • Faster than suture
  • Infection risk
  • Pain
  • Scar

Surgical Tape

  • Faster than suture
  • Lower cost
  • Low strength
  • Infection risk

Tissue Adhesive

  • User friendly
  • Competitive strength
  • No anesthesia (ER)
  • Less pain
  • Better cosmetic result
  • Less infection rate

TissueAid™ Instruction for Use

Step 1:

Before application of TissueAid™, thoroughly clean the wound following standard surgical practice for wound preparation (i.e. irrigate, debride, assure hemostasis, and close deep layers making sure that the wound edges can be easily approximated).

Pat the wound dry with dry and sterile gauze to assure direct contact of the TissueAid™ to the skin.

Step 2:

Remove the TissueAid™from the blister package. While holding the aluminum tube between the thumb and forefinger of one hand and the nozzle with the other hand, rotate the nozzle clockwise and screw into the aluminum tube until the seal on the tube is punctured allowing the TissueAid™to flow into the nozzle.

Gently squeeze the tube to express enough TissueAid™to wet the soft tip.

Step 3:

Approximate wound edges with fingers or sterile forceps. Gently apply the liquid TissueAid™in one continuous layer to the surface of the approximated wound edges using a gentle brushing motion.

Try to finish the application in one minute before the soft tip dried up. Do not squeeze the tube when the tip is dry and stiff.

Step 4:

Maintain manual approximation of the wound edges for approximately 60 seconds until the adhesive is dry.

Full apposition strength is expected to be achieved within several minutes after the adhesive is applied. If adhesive is over-applied, a longer dry time is needed.
If the tip dried up and a continuous application is needed, unscrew the used tip and replace it with the attached second soft tip. Follow Steps 2 and 3 to apply the TissueAid™.